Probe Ranger™ - Probe stations for high-frequency circuit board testing
CCN makes and sells the Probe Ranger™ line of probe stations, related accessories, and the FastProbe™ line of circuit probes. The Probe Ranger series is designed for the simplicity and ruggedness required in circuit board testing while providing reliable high-frequency (over 40 GHz) electrical connections to contact pads on your boards. There is no longer a need to add coax connectors to every high-frequency test point on your test boards, and there is no need to attempt high-frequency probe connections by hand.
Make single-ended and differential connections to your device by directing the probe tips to your trace pads using XYZ micropositioners and dedicated digital microscopes. Model your channel's TDR impedance, S-parameters, cross-talk, coupling, and loss. Measure signals at the end of the channel for distortion, eye-patterns, and deterministic jitter.
Our co-founder, Dr. Don DeGroot developed probe station de-embedding and calibration methods at a national metrology lab. Contact CCN to get the best probing solutions available for your application. CCN also bundles Probe Rangers with the Teledyne LeCroy SPARQ to sell complete circuit board test and measurement solutions.
Make single-ended and differential connections to your device by directing the probe tips to your trace pads using XYZ micropositioners and dedicated digital microscopes. Model your channel's TDR impedance, S-parameters, cross-talk, coupling, and loss. Measure signals at the end of the channel for distortion, eye-patterns, and deterministic jitter.
Our co-founder, Dr. Don DeGroot developed probe station de-embedding and calibration methods at a national metrology lab. Contact CCN to get the best probing solutions available for your application. CCN also bundles Probe Rangers with the Teledyne LeCroy SPARQ to sell complete circuit board test and measurement solutions.
|
Probe Ranger™ Model PR1200 is an easy-to-use probe station for connecting network analyzers and oscilloscopes to signal channels and devices on smaller circuit boards. Probe Ranger 1200 accommodates test boards up to 10 in x 12 in (250 mm x 300 mm). The base Probe Ranger model is equipped with two probe positioners and two USB Microscope Cameras. You can buy two additional probe positioners for four-port single-ended measurements, or two-port differential measurements. The Probe Ranger 1200 works with our FastProbes and most third-party RF/Microwave probes.
|
|
Probe Ranger™ Model PR1800 is our most popular probe station product. It accommodates test boards up to 16 in x 24 in (400 mm x 600 mm) as well as our VerticalRanger™ Kit for probing one or both sides of a board held in the vertical position. The base model ships with two probe positioners and two USB Microscope Cameras. Option 4P provides 4 XYZ positioners for multi-port measurements. The Probe Ranger 1800 works with our FastProbes and most third-party RF probes.
|
|
Vertical Ranger™ is an accessory that holds circuit cards on edge for probing both sides of a circuit board simultaneously. Model VR12 includes two vertical rails that hold XYZ Probe Positioners next to the faces of the PCB under test and an adjustable PCB Holder that positions test boards of different widths and thicknesses in a vertical orientation.
|
